High Frequency Welded Fin Tube (Continuously Welded Spiral Fin Tube):
As the name suggests, in this type of Fin Tube the finning is a Spirally Wound.
The fins are manufactured by Spirally Winding the fin around the Base Tube and Pipe.
During the winding the fin is Continuously Welded by High Frequency welding giving the Most robust bond between the the Fin and the Tube.
This type of Fin Tube is used specifically where the application involves a lot of Mechanical Stresses like continuous vibrations etc.
The welding bond between the Tube and The Fin also ensures that almost perfect heat Transfer Efficiency is achieved.
Also it can give the highest operating temperature ranges.
These Fin Tubes find application in RADIATORS, AIR PREHEATERS, WASTE HEAT RECOVERY SYSTEMS,
& BOILER FIN TUBES etc and are preferred in Industries like Power Plants, Chemical Industries, Steel Plants, and Chiller Plants etc.
High Frequency Welded Fin Tube (Continuously Welded Spiral Fin Tube):-
Manufacturing Process:- Continuously Welded Spiral Fin Tube
Fin To Tube Bond:- Excellent
Heat Transfer Efficiency:- Excellent
Mechanical Resistance:- Excellent
(Hence can be frequently cleaned with high pressure jets unlike other fin tubes. Thereby reducing down time and increasing overall life)
Corrosion Protection:- Moderate
Temperature Range:- Up to Maximum 500 Deg C
Manufacturing Range (Welded Fin Tube/Solid Fin Tube):-
-
Sr. No
Particulars
Range
1
Base Tube Material
Stainless Steel, Carbon Steel, Alloy Steel, Titanium, Copper, Duplex Stainless Steel, and Inconel etc. (all material in the theoretical limit)
2
Base Tube Outside Diameter
16.00 mm to 225.00 mm (½” NB Pipe to 8” NB Pipe)
3
Base Tube Thickness
2.50 mm And Above
4
Base Tube Length
500 mm Min To 12000 mm
5
Fin Material
Carbon Steel, Alloy Steel & Stainless Steel
6
Fin Thickness
0.80 mm To 2.50 mm
7
Fin Density
79 FPM (2 FPI) to 276 FPM (7 FPI)
8
Fin Height
9.8 mm to 25.00 mm
9
Bare Ends
As per Client Requirement
10
Manufacturing Capacity
3,00,000 Meter Per Annum
We can supply material on urgent delivery basis because of large stock and relations with raw material suppliers.
We use only Prime Quality base tube and Aluminum Material.
Description
Product Name: Steel Fin Tube, Welded Fin Tube, Spiral Fin Tube, Longitudinal Fin Tube, Stud Fin Tube,H/HH type Fin Tube
• Base Pipe OD: 15.88-273mm
• Fin Height: 4.0-50mm
• Fin Thickness: 0.3 -2.0mm
• Number of Fins: 3~14 FPI
• Fin Pitch: 3mm-14mm
• End: Plain Ends, Beveled Ends
Base Tube Material
• Carbon Steel：ASTM A106 Gr B,ASME SA179/ASTM A179,ASME SA192/ASTM A192
• Stainless Steel：ASME SA213/ASTM A213 ；TP304/304L TP316/TP316L TP321 TP310S TP317
• Alloy Steel：ASME SA210/ASTM A210
Fin Material
• Carbon Steel：ASTM A53 GB/T5213-2019 08AL SPCC
• Stainless Steel: TP304/304L TP316/TP316L TP409
If you have any Inquiry, please don't hesitate to contact us immediately,
Email:info@fintuberadiator.com
| Type | Description | Base tube | Base tube | Fin specification | |||||
| O.D. (mm) | O.D. (inch) | Fin pitch(mm) | Fin pitch(FPI) | Fin height(mm) | Fin height(inch) | Fin thick(mm) | Fin thick(inch) | ||
| Embedded | G Type Embedded/ Grooved Fin Tube | 14-51 | 0.5-2 | 2--6 | 3--14 FPI | 7--17 | 0.27--0.669 | 0.35--2 | 0.0137-0.0787 |
| L Type Embedded/Wrap Around Fin Tube | 10-51 | 0.4-2 | 2--6 | 3--14 FPI | 7--17 | 0.27--0.669 | 0.35--2 | 0.0137-0.0787 | |
| LL Type Embedded/Wrap Around Fin Tube | 10-51 | 0.4-2 | 2--6 | 3--14 FPI | 7--17 | 0.27--0.669 | 0.35--2 | 0.0137-0.0787 | |
| KL Type Embedded/Wrap Around Fin Tube | 10-51 | 0.4-2 | 2--6 | 3--14 FPI | 7--17 | 0.27--0.669 | 0.35--2 | 0.0137-0.0787 | |
| Extruded | Carbon base tube | 15.88--50.8 | 0.625--2 | 1.8-8 | 3--14 FPI | 5--16 | 0.2--0.63 | 0.3-1.2 | 0.012--0.047 |
| Stainless base tube | 15.88--50.8 | 0.625--2 | 1.8-8 | 3--14 FPI | 5--16 | 0.2--0.63 | 0.3-1.2 | 0.012--0.047 | |
| Copper base tube | 15.88--50.8 | 0.625--2 | 1.8-8 | 3--14 FPI | 5--16 | 0.2--0.63 | 0.3-1.2 | 0.012--0.047 | |
| Low Fin Tubes ( Integral Fin Tube ) | Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy. | 6.35--38 | 0.25--1.5 | 2.8--12.7 | 2--9FPI | 0.38--1.27 | 0.015 --0.050 | ||
| High Frequency Welding Fin tube | Solid Helical Fin Tubes | 15.88--273.1 | 0.625--10 | 3--25 | 0.118--1 | 5--30 | 0.196--11.811 | 1--3 | 0.0393--0.1181 |
| Serrated Helical Fin Tube | 15.88--273.1 | 0.625--10 | 3--25 | 0.118--1 | 5--30 | 0.196--11.811 | 1--3 | 0.0393--0.1181 | |
| H/HH Type Rectangular Fin tube | 15.88--273.1 | 0.625--10 | 3--25 | 0.118--1 | <219 | <8 | 1--3 | 0.0393--0.1181 | |
| Studded Fin Tube | 15.88--273.1 | 0.625--10 | 3--25 | 0.118--1 | 5--30 | 0.196--11.811 | φ5-20 | ||
| Elliptical/Oval Fin tube | Hot dipped galvanized | 36*14 | 2.5--3 | 0.0984--0.118 | 55*26 | 0.25 | 0.0098 | ||
| Laser Fin tube | Copper,Brass,nickel | 10--45 | 0.393--1.771 | 2--10 | 0.0787-0.3937 | 5--23 | 0.196--0.905 | 0.3-1.2 | 0.011--0.047 |
